--- title: "Version 2022.3" slug: "version-20223" updated: 2023-03-28T20:21:51Z published: 2023-03-28T20:21:51Z canonical: "support.nectarcorp.com/version-20223" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.nectarcorp.com/llms.txt > Use this file to discover all available pages before exploring further. # Version 2022.3 ## ## OVERVIEW These release notes are for **Nectar** **Foundation APM** (formerly Nectar Foundation). For more information, contact Nectar Support ([support@nectarcorp.com](mailto:support@nectarcorp.com)). ### FOUNDATION APM WARNINGThe Derby database version was upgraded in Release 8.3. This makes downgrade impossible. Customers MUST back up the database directory BEFORE upgrading to Release 8.3 or higher. - It is not possible to use Remote Software Upgrade on a Linux platform to upgrade from a version prior to v8.6. - RIG Client requires Oracle or OpenJDK JRE 1.8 and above. - **Note:** Runtime version will be enforced before RIG Client JAR files are downloaded. - **Before upgrading to v2022.3**, your existing installation must be at v5.6.2.x or later, licensed, and started successfully. If you attempt to upgrade directly to v2022.3, then the installer will display the following message: **Selected installation’s main version is earlier than 5.6.2 required for upgrade.** - For the server to start successfully, the port number specified for the **serverport** property of the **server. properties** file must not be in use. If the port is already in use, change the port number to an unused port number to correct the issue. The default port number is 80. ## TECHNICAL NOTES NOTE Apache Log4j Critical Vulnerabilities (CVE-2021-44228, CVE-2021-45046, CVE-2021-45105, CVE-2021-44832). Foundation APM uses Log4J versions 2.17.1 and 2.12.4 for all components in release 2021.3 or higher that contain fixes for all known security vulnerabilities. TLSv1 and TLSv1.1 are disabled by default by the JRE configuration. To learn how to enable this, go to the [Nectar Foundation APM Installation Guide](/v1/docs/installation-guide), or to review the instructions go to: [https://www.java.com/en/configure_crypto.html](https://www.java.com/en/configure_crypto.html). ### UPGRADE REQUIREMENTS The database migrations started with release 2021.1 and will make it difficult to downgrade to **Foundation APM** releases 8.7.1 and below. We strongly advise customers to back up the RIG database before upgrading to v2022.3 and later. NOTENectar does not support anything below CentOS 8. ### CISCO UCM VKM - When upgrading RIGs from a release prior to v8.0 that are monitoring Cisco UCM systems, additional time will be required based on the number of historical call detail records (CDRs) to perform database migration following restart. - If the Cisco UCM VKM module is enabled on a system **when upgrading to v2022.3 from a pre-7.x** release, the Installer will detect it and display a warning message, informing the user to offboard any existing Cisco UCM systems before proceeding with the upgrade. For more information on offboarding, see [**Cisco UCM VKM Configuration Guide**](/v1/docs/cisco-ucm-vkm-configuration-guide). - Once the Cisco UCM system(s) has been offboarded, the user can re-run the upgrade process and select the **Module Override** to complete the upgrade. ### CISCO MEETING SERVER VKM For licensing, a status is received for each type of license (nolicense, activated, or expired). If a nolicense case, a WARNING event is generated. However, if the customer does not want to see these nolicense events, they can disable the associated poller(s). ### CISCO EXPRESSWAY VKM When onboarding Cisco Expressway VKM, use the same username and password across all cluster peers. ### MICROSOFT SKYPE FOR BUSINESS VKM Customers who upgrade to v2022.3 have the option to continue using the Legacy SfB module. However, to access the new SfB features available since v8.0, you must: 1. Offboard the Legacy SfB system. 2. Enable and onboard the new SfB VKM and system. ### AVAYA CALL MANAGEMENT SYSTEM (CMS) VKM As of v8.1, Nectar no longer supports Avaya CMS r16 (and earlier). CMS r16 uses the 256-bit Diffie-Helman encryption algorithm, which is considered a security risk and has been deprecated. It is no longer supported in current SSH-2 implementations. If you accept this CMS security vulnerability, you can maintain CMS r16 monitoring with Nectar using a Nectar version prior to v8.1. ### AVAYA SYSTEM MANAGER VKM If you onboard Avaya System Manager with invalid credentials, you must delete the incorrect entry and re-onboard the System Manager. For more information, see [**Avaya System Manager r7.1 and above**](/v1/docs/avaya-system-manager-r71-and-above-deployment-guide-2). IMPORTANT Starting with Nectar release 2022.2, Avaya System Manager 6.x is no longer supported. Nectar uses the Avaya WSDL for collections on this platform. System Manager has to be 7.x and above. Session Manager collections are through the System Manager. SNMP V2/V3 is used for platform environments. ### IP OFFICE VKM (r10.1 and above) Nectar leverages Avaya’s Service Monitoring Web Services API to monitor IP Office r10.1 and above. If you are currently monitoring an IPO r10.1 or above with Nectar v7.3 and prior, you can migrate to Nectar’s new API support by following these steps: - Disable and remove the existing monitoring. - Delete any IP Office traps in the Receiver module. - Disable the previous module and enable the new module using RIG > Module Configuration. - Restart the RIG. For more information, see [**Avaya IP Office r10.1 and above Deployment Guide**](/v1/docs/deployment-guide-avaya-ip-office-r101). ### MOTHER MODULE The Mother Module must be enabled for Perspective deployments. For more information, see [**Mother Module RIG Guide**](/v1/docs/mother-module-rig-guide-2). ### PROPERTIES FILE **After upgrading to v2022.3**, if you have or plan to manipulate a properties file that uses a file path or directory, then you must verify that you are using the proper backslash (\) or forward slash (/): **Windows:** - Use double backslash (\\), for example, :\\\\ or - Use single forward slash (/), for example, :// **Linux/iOS:** - Use single forward slash (/), for example, // ### GENERAL DATA PROTECTION REGULATION You must upgrade to ‘Version 7.2 or later’ (CIP, EIP, RIG, Perspective Agent/Controller as well as the Nectar Foundation Client) to enable the new General Data Protection Regulation (GDPR) audit logging. Logging is enabled by default but can be customized to suit your specific auditing needs. The **Apps**\**\etc\log4j2.xml** file is used to enable that customization after the upgrade to ‘Version 7.2 or later’. The upgrade to ‘Version 7.2 or later’ will back up your existing **log4j2.xml** file before installing the new version of that file. If you have previously customized the **log4j2.xml** file, you will have to manually migrate those changes to the new **log4j2.xml** file. Your previous version can be accessed by navigating to **Apps**\**\rollback\etc\log4j2.xml** AFTER you have upgraded. ## NEW FEATURES, IMPROVEMENTS, AND RESOLVED ISSUES Below you will find improvements, bug fixes, and technical upgrades for v2022.3. ### NEW FEATURES - N/A ### BUG FIXES Fixed minor issues in the Avaya Aura Communication Manager (CM), Avaya Session Manager (ASM), and Cisco video modules. ### ### IMPROVEMENTS - CMP-10687 - JRE that is being installed by our product has been upgraded to use RedHat OpenJDK JRE 1.8.0_322 ### DOCUMENTATION - N/A ## SUPPORTED PRODUCTS Currently, Nectar supports the following devices and applications. Nectar is consistently adding support for different devices and applications. NOTENectar can monitor any server-based (Windows or Linux) application. Please check with your Nectar Channel Account Manager for an application or device that you would like to monitor that is not listed here. ### VENDOR KNOWLEDGE MODULES | Avaya Communication Manager (ACM) - r5, r6, r7, and r8 --- Avaya Aura Module (AAM) - r7 with restrictions - r8 and r10 | Cisco Meeting Server - Cisco Meeting Server r2.2 and later | | --- | --- | | Avaya Business Communication Manager (BCM) - r5 and r6 | Cisco Unified Communications Manager (CUCM) - r9.1, r10.5, r11.x, and r12.x | | Avaya Call Management System (CMS) - r13, r14, r15, r16, r17, r18, and r19 Note: CMS r16 and earlier require using a Nectar release prior to Nectar r8.1. | Cisco Unity Connection - r9, r10, r11, and r12 | | Avaya Communication Server 1000 (CS1000) - r6 and r7 | Cisco Expressway - vX8.9 | | Avaya System Manager - R5, r6 via SSH connection - R7.1.3 and above via API | IPC Unigy - Requires Blue Wave r3.1 | | Avaya Session Manager - R5, r6 via SSH connection - R7.1.3 and above via API | Microsoft Lync 2010 and 2013 | | Avaya IP Office - r5 through r10: via SSA integration - r10.1 and above: via Service Monitoring API integration (requires Nectar r7.4 and above) | Microsoft Skype for Business | | Avaya Modular Messaging - r3, r4, r5, r6, and r7 | Uninterruptible Power Supply (UPS) Module - RFC-1628 compliant | | Avaya Voice/Experience Portal (AVP/AEP) - r5, r6, and r7 | | ### VENDOR KNOWLEDGE SCRIPTS | Cisco Unified Border Element (CUBE) | Sonus 1K/2K Session Border Controllers (SBCs) | | --- | --- | | Cisco 4K and 5K Integrated Services Routers (ISRs) | VMware ESXi | ### INFORMATION PACKS | Aculab PLC Groomer II | Juniper Networks Netscreen VPN Firewall Poller Pack | | --- | --- | | AudioCodes Mediant Gateway Poller Pack 1000 and 3000 | Juniper Networks Netscreen VPN Firewall Trap Pack | | AudioCodes Mediant Gateway Trap - 1000 and 3000 | Juniper Networks Poller Pack | | Avaya Aura AES Poller Pack | Juniper Networks Trap Pack | | Avaya Aura AES Trap Pack | Linux Server (Host Wizard) | | Avaya Media Gateway Poller Pack | Microsoft Server (Host Wizard) | | Avaya G860 Media Gateways | Nagios Trap Pack | | Cisco Router Poller Pack | NetApp Poller Pack | | Cisco Router Trap Pack | NetApp Trap Pack | | Dell OpenManage Poller Pack | NICE Perform eXpress Trap Pack | | Extreme Networks Poller Pack | Oracle Poller Pack | | Extreme Networks Trap Pack | Oracle Trap Pack | | Genesys Poller Pack | Oracle Solaris Poller Pack | | Genesys Trap Pack | Sonus 1K/2K Poller Pack | | HP Autonomy etalk Qfiniti Call Recording Trap Pack | VMware Poller Pack |