Version 2023.1
    • 19 Apr 2023
    • 6 Minutes to read
    • Contributors
    • Dark
    • PDF

    Version 2023.1

    • Dark
    • PDF

    Article Summary


    These release notes are for Nectar Foundation APM (formerly Nectar Foundation). For more information, contact Nectar Support (


    The Derby database version was upgraded in Release 8.3. This makes downgrade impossible. Customers MUST back up the database directory BEFORE upgrading to Release 8.3 or higher.
    • It is not possible to use Remote Software Upgrade on a Linux platform to upgrade from a version prior to v8.6.
    • RIG Client requires Oracle or OpenJDK JRE 1.8 and above.
    • Note: Runtime version will be enforced before RIG Client JAR files are downloaded.
    • Before upgrading to v2023.1, your existing installation must be at v5.6.2.x or later, licensed, and started successfully. If you attempt to upgrade directly to v2023.1, then the installer will display the following message: Selected installation’s main version is earlier than 5.6.2 required for upgrade. 
    • For the server to start successfully, the port number specified for the serverport property of the server. properties file must not be in use. If the port is already in use, change the port number to an unused port number to correct the issue. The default port number is 80.



    Apache Log4j Critical Vulnerabilities (CVE-2021-44228, CVE-2021-45046, CVE-2021-45105, CVE-2021-44832). Foundation APM uses Log4J versions 2.17.1 and 2.12.4 for all components in release 2021.3 or higher that contain fixes for all known security vulnerabilities.

    TLSv1 and TLSv1.1 are disabled by default by the JRE configuration. To learn how to enable this, go to the Nectar Foundation APM Installation Guide, or to review the instructions go to:


    The database migrations started with release 2021.1 and will make it difficult to downgrade to Foundation APM releases 8.7.1 and below. We strongly advise customers to back up the RIG database before upgrading to v2023.1 and later.

    Nectar Foundation APM supports only the following Linux distributions: CentOS Stream 8/9 and RHEL 8/9.


    • When upgrading RIGs from a release prior to v8.0 that are monitoring Cisco UCM systems, additional time will be required based on the number of historical call detail records (CDRs) to perform database migration following restart.
    • If the Cisco UCM VKM module is enabled on a system when upgrading to v2023.1 from a pre-7.x release, the Installer will detect it and display a warning message, informing the user to offboard any existing Cisco UCM systems before proceeding with the upgrade. For more information on offboarding, see Cisco UCM VKM Configuration Guide.
    • Once the Cisco UCM system(s) has been offboarded, the user can re-run the upgrade process and select the Module Override to complete the upgrade.


    For licensing, a status is received for each type of license (nolicense, activated, or expired). If a nolicense case, a WARNING event is generated. However, if the customer does not want to see these nolicense events, they can disable the associated poller(s).


    When onboarding Cisco Expressway VKM, use the same username and password across all cluster peers.


    Customers who upgrade to v2023.1 have the option to continue using the Legacy SfB module. However, to access the new SfB features available since v8.0, you must:

    1. Offboard the Legacy SfB system.
    2. Enable and onboard the new SfB VKM and system.


    As of v8.1, Nectar no longer supports Avaya CMS r16 (and earlier). CMS r16 uses the 256-bit Diffie-Helman encryption algorithm, which is considered a security risk and has been deprecated. It is no longer supported in current SSH-2 implementations.

    If you accept this CMS security vulnerability, you can maintain CMS r16 monitoring with Nectar using a Nectar version prior to v8.1.


    If you onboard Avaya System Manager with invalid credentials, you must delete the incorrect entry and re-onboard the System Manager. For more information, see Avaya System Manager r7.1 and above.

    Starting with Nectar release 2022.2, Avaya System Manager 6.x is no longer supported. Nectar uses the Avaya WSDL for collections on this platform. System Manager has to be 7.x and above. Session Manager collections are through the System Manager. SNMP V2/V3 is used for platform environments.

    IP OFFICE VKM (r10.1 and above)

    Nectar leverages Avaya’s Service Monitoring Web Services API to monitor IP Office r10.1 and above. If you are currently monitoring an IPO r10.1 or above with Nectar v7.3 and prior, you can migrate to Nectar’s new API support by following these steps:

    • Disable and remove the existing monitoring.
    • Delete any IP Office traps in the Receiver module.
    • Disable the previous module and enable the new module using RIG > Module Configuration.
    • Restart the RIG.

    For more information, see Avaya IP Office r10.1 and above Deployment Guide.


    The Mother Module must be enabled for Perspective deployments. For more information, see Mother Module RIG Guide.


    After upgrading to v2023.1, if you have or plan to manipulate a properties file that uses a file path or directory, then you must verify that you are using the proper backslash (\) or forward slash (/):


    • Use double backslash (\\), for example, <drive>:\\<folder>\\<folder|file>
    • Use single forward slash (/), for example, <drive>:/<folder>/<folder|file>


    • Use single forward slash (/), for example, /<folder>/<folder|file>


    You must upgrade to ‘Version 7.2 or later’ (CIP, EIP, RIG, Perspective Agent/Controller as well as the Nectar Foundation Client) to enable the new General Data Protection Regulation (GDPR) audit logging. Logging is enabled by default but can be customized to suit your specific auditing needs. The Apps\<partner name>\etc\log4j2.xml file is used to enable that customization after the upgrade to ‘Version 7.2 or later’.

    The upgrade to ‘Version 7.2 or later’ will back up your existing log4j2.xml file before installing the new version of that file.

    If you have previously customized the log4j2.xml file, you will have to manually migrate those changes to the new log4j2.xml file. Your previous version can be accessed by navigating to Apps\<partner name>\rollback\etc\log4j2.xml AFTER you have upgraded.


    Below you will find improvements, bug fixes, and technical upgrades for v2023.1.


    • CMP-10743 - Video endpoint status collections and Pollers will soon be shown in Nectar DXP. 


    • CMP-10751 - We are now able exclude categories of events using a configuration setting. The settings are located on the Development tab under Test scenarios.
    • CMP-10767 - Shared Avaya Media Servers are now accounted for in the Region's DSP Usage.


    • CMP-10663 - Avaya System Session Manager is now able to be configured for CDR in the System Manager; each Session Manager can have its own FTP credentials. 
    • CMP-10722 - The Avaya Aura CM VKM is now able to collect Hunt Group table data for Nectar DXP.
    • CMP-10735 - JRE for Nectar's product installations have been upgraded to: RedHat OpenJDK JRE 1.8.0_362.


    • N/A


    Currently, Nectar supports the following devices and applications. Nectar is consistently adding support for different devices and applications.

    Nectar can monitor any server-based (Windows or Linux) application. Please check with your Nectar Channel Account Manager for an application or device that you would like to monitor that is not listed here.


    Avaya Communication Manager (ACM)

    • r5, r6, r7, and r8

    Avaya Aura Module (AAM)

    • r7 with restrictions
    • r8 and r10

    Cisco Meeting Server

    • Cisco Meeting Server r2.2 and later

    Avaya Business Communication Manager (BCM)

    • r5 and r6

    Cisco Unified Communications Manager (CUCM)

    • r9.1, r10.5, r11.x, and r12.x

    Avaya Call Management System (CMS)

    • r13, r14, r15, r16, r17, r18, and r19

    Note: CMS r16 and earlier require using a Nectar release prior to Nectar r8.1.

    Cisco Unity Connection

    • r9, r10, r11, and r12

    Avaya Communication Server 1000 (CS1000)

    • r6 and r7

    Cisco Expressway

    • vX8.9

    Avaya System Manager

    • R5, r6 via SSH connection
    • R7.1.3 and above via API

    IPC Unigy

    • Requires Blue Wave r3.1

    Avaya Session Manager

    • R5, r6 via SSH connection
    • R7.1.3 and above via API

    Microsoft Lync 2010 and 2013

    Avaya IP Office

    • r5 through r10: via SSA integration
    • r10.1 and above: via Service Monitoring API integration (requires Nectar r7.4 and above)

    Microsoft Skype for Business

    Avaya Modular Messaging

    • r3, r4, r5, r6, and r7

    Uninterruptible Power Supply (UPS) Module

    • RFC-1628 compliant

    Avaya Voice/Experience Portal (AVP/AEP)

    • r5, r6, and r7


    Cisco Unified Border Element (CUBE)

    Sonus 1K/2K Session Border Controllers (SBCs)

    Cisco 4K and 5K Integrated Services Routers (ISRs)

    VMware ESXi


    Aculab PLC Groomer II

    Juniper Networks Netscreen VPN Firewall Poller Pack

    AudioCodes Mediant Gateway Poller Pack

    1000 and 3000

    Juniper Networks Netscreen VPN Firewall Trap Pack

    AudioCodes Mediant Gateway Trap

    • 1000 and 3000

    Juniper Networks Poller Pack

    Avaya Aura AES Poller Pack

    Juniper Networks Trap Pack

    Avaya Aura AES Trap Pack

    Linux Server (Host Wizard)

    Avaya Media Gateway Poller Pack

    Microsoft Server (Host Wizard)

    Avaya G860 Media Gateways

    Nagios Trap Pack

    Cisco Router Poller Pack

    NetApp Poller Pack

    Cisco Router Trap Pack

    NetApp Trap Pack

    Dell OpenManage Poller Pack

    NICE Perform eXpress Trap Pack

    Extreme Networks Poller Pack

    Oracle Poller Pack

    Extreme Networks Trap Pack

    Oracle Trap Pack

    Genesys Poller Pack

    Oracle Solaris Poller Pack

    Genesys Trap Pack

    Sonus 1K/2K Poller Pack

    HP Autonomy etalk Qfiniti Call Recording Trap Pack

    VMware Poller Pack

    Was this article helpful?

    What's Next
    Changing your password will log you out immediately. Use the new password to log back in.
    First name must have atleast 2 characters. Numbers and special characters are not allowed.
    Last name must have atleast 1 characters. Numbers and special characters are not allowed.
    Enter a valid email
    Enter a valid password
    Your profile has been successfully updated.

    Eddy, a super-smart generative AI, opening up ways to have tailored queries and responses